How to prevent damage to automotive stamping parts

How to prevent damage to automotive stamping parts: 1. The model, specifications, and performance of the selected hardware accessories should comply with current standards and relevant regulations, and match the selection of plastic steel doors and windows. 2. The sliding hinge shall not be made of aluminum alloy material, but shall be made of stainless steel material. 3. For sliding windows with a width exceeding 1 meter, or doors and windows with double-layer glass installed, it is advisable to install double pulleys or use rolling pulleys. 4. Hardware accessories should be installed later, and door and window locks, handles, etc. should be assembled after the window and door leaf are inserted into the frame. The position should be correct and the switch should be flexible. 5. Install hardware using fastening screws, with a metal lining plate inside. The thickness of the lining plate should be at least twice the pitch of the fastener. It shall not be fastened to plastic profiles, nor shall non-metallic liners be used. 6. After the installation of hardware stamping parts, attention should be paid to maintenance to prevent rust and corrosion. In daily use, it is important to gently close and open to prevent damage caused by hard closing and opening. Without any noise, we have the current nylon wheels. It not only has no noise when pushed and pulled, but also is smooth, lightweight, and has a service life no shorter than the various pulleys mentioned above. To ensure that the doors and windows are functioning properly. To run smoothly, it is necessary to choose a pulley for the (door) window. Poor quality pulleys appear to have rough workmanship on the surface, lack smoothness, and are not flexible when sliding. They are small and light.

2022-07-28

A brief introduction to casting molds

Casting mold is a process in which a hydraulic cylinder drives the injection head to rapidly press molten metal into the mold cavity. Due to the use of hydraulic pressure, the pressure is relatively high, so it is commonly known as the casting mold process.

2022-01-10

Interchangeability Processing of Insert Blocks for Mold Standardization

In recent years, our company has been committed to improving production efficiency, shortening the mold manufacturing cycle, while avoiding and reducing the consumption of the machine tool itself during large-scale CNC roughing, achieving the interchangeability of mold inserts, shortening the maintenance time of delivered molds, and providing customers with stable and reliable services. Currently, we have achieved the installation of only some mold inserts without matching them!

2020-04-23

Insert block processing

Transforming the non-standard inserts of the mold into standardized processing makes the later maintenance and repair of the mold a very simple task, which has a significant impact on the customer's later use.

2020-04-23

Traditional processing methods

1. Castings: not subjected to aging 2. Mold surface: No mold surface refinement 3. Programming: No process design and tool path optimization

2020-04-23